Below is a list of some frequently asked questions, you may find them helpful. If you have any other questions that aren’t covered here, then please feel free to get in touch with us and we shall be happy to answer any queries you may have.
There are 6 types of asbestos, the three main types which were imported and used in the UK are Chrysotile: This is a white fibre asbestos and accounts for 90% of asbestos in products. It is a member of the serpentine group. Amosite: This is brown/grey in colour and is straight, unlike Chrysotile which is curly. It belongs to the amphibole group. Finally, Crocidolite: This is blue, and the fibres are also straight. It is also a member of the amphibole group.
All forms are potentially dangerous and many of the asbestos-containing materials found in buildings include a combination of two or more asbestos types.
If the asbestos material is in good condition and is not disturbed it does not pose a risk to health. However, if disturbed the asbestos fibres can break down into sharp fibres that can be breathed in. If these fibres lodge in the lungs they do not dissolve and can work their way to the outer surface leading to several diseases, some of which are fatal.
The risk of developing asbestos-related disease depends on a number of factors including cumulative dose, time since last exposure and the type and size of asbestos fibres. There is usually a long delay between the first exposure to asbestos fibres and the diagnosis of disease; this ranges from between 15 to as many as 60 years.
- Mesothelioma (a cancer of the lining of the lungs; it is always fatal and is almost exclusively caused by exposure to asbestos).
- Asbestos-related lung cancer (which is almost always fatal).
- Asbestosis (a scarring of the lungs which is not always fatal but can be a very debilitating disease, greatly affecting quality of life).
- Diffuse pleural thickening (a thickening of the membrane surrounding the lungs which can restrict lung expansion leading to breathlessness).
You can get further detailed information on these diseases from the HSE website.
It can take anywhere between 15-60 years for any symptoms to develop after exposure, so these diseases will not affect you immediately but may do later in life. You need to start protecting yourself against any exposure to asbestos now because the effect is cumulative.
Asbestos was a widely used material within commercial buildings, homes and machinery until 1999, when it was banned. This means that asbestos is common in the general environment. However, working directly with asbestos-containing materials (ACMs) can give personal exposures to airborne asbestos that are much higher than normal environmental levels. Repeated occupational exposures can give rise to a substantial cumulative exposure over time. This will increase the risk of developing an asbestos-related disease in the future.
The majority of the current fatal cases from asbestos exposure (approximately 4000 deaths per year) are associated with very high exposures from past industrial processes and installation of asbestos products.
This legacy retains the potential to kill those who are unknowingly exposed to the fibres in their day-to-day work, or those who choose to ignore the controls that provide effective protection during their day-to-day works, risking not only their lives but anyone who is unlucky enough to be in close proximity.
Disturbing & breathing in asbestos can lead to you developing one of 3 fatal diseases:
Asbestosis – Scarring of the lung leading to shortness of breath
Mesothelioma – Cancer of the lining of the lungs & stomach
THERE IS NO CURE FOR ASBESTOS RELATED DISEASES Although the use and importation of asbestos has been banned by law, there were many thousands of tonnes used to make approximately 3,000 different products, many of which were commonly used in buildings. Much of this is still there and is not easily identified from its appearance so asbestos testing is often required.
- Loose asbestos packing between floors and in partition walls
- Sprayed (limpet) asbestos on structural beams and girders
- Lagging on pipe work and boilers, calorifiers, heat exchangers, etc
- Asbestos Insulating Board (AIB) ceiling tiles, partition walls, service duct covers, fire breaks, heater cupboards, door panels, lift shafts linings, fire surrounds, soffits, etc
- Asbestos cement products such as roof & wall cladding, bath panels, boiler & incinerator flues, fire surrounds, gutters, rainwater pipes, water tanks, etc.
- Other products such as floor tiles, mastics, sealants, decorative coatings, rope seals & gaskets, millboard, paper products, cloth & bituminous products, etc
Over the last few years, the level of asbestos-related diseases has risen within the following trades:
- Cable Layers & IT installers Roofing contractors
- Carpenters & Joiners Plumbers
- Painters & Decorators Maintenance staff
- Demolition Workers Teachers
- Plasterers Electricians
- Fire/burglar alarm installers
Earlier Regulations tended to focus on specific industries and processes, but from 1987 the scope of the Regulations were extended to encompass the need to control the risks in most operations where asbestos fibres could be released. Asbestos survey and asbestos testing are key steps to improve safety.
Lay down the requirements for the protection of people being exposed to asbestos. These Regulations include the requirement for those with responsibility for the maintenance and/or repair of non-domestic premises, to identify and manage any risk from asbestos within their premises
The CAR Regulations are supported by Approved Codes of Practice and/or guidance that provide advice on how to comply with the legislation. These highlight the importance of asbestos testing.
The HSE are looking for organisations to have management systems in place to identify asbestos, assess its condition and unless it is in a poor state of repair, maintain it, so as not to affect the health of any person. If asbestos has to be removed, then all aspects of that work are to be carried out in a manner that ensures there is no risk to exposure.
or call 01923 260043 | email email@example.com